The temperature level in =
boilers is an=20
extremely important control parameter. The T1 is a self-contained =
dual=20
wavelength pyrometer designed to provide this information. The =
design=20
eliminates problems associated with emissivity variations or =
radiation=20
absorption by dust and dirt. The exceptionally low cost, =
maintanence free=20
operation and easy installation allow a rapid return on=20
investment. |
|
Temperature =
range: 700=B0=20
– 1400=B0C (other temperature ranges are=20
available) |
|
Accuracy: =
=B1 1%=20
f.s. |
|
Power =
supply: 24=20
VDC |
|
IP 65 =
enclosure=20
rating |
|
Output: =
0(4)-20 mA=20
linearly proportional to the=20
temperature | |
The radiation pyrometer SPM =
has been=20
designed for the radiation detecton of flames, thus offering a =
finishing=20
touch to the BFI production range. It supplies most important data =
for the=20
optimization of the efficiency control of the combustion, emission =
reduction, and detection of flame location on grid fires. The SPM =
is=20
available with just the same features as our flame scanners and =
processes=20
the input signal with a logarithmical characteristic field. This=20
guarantees a very wide dynamic scanner range. Due to the =
reproducible=20
adjustment of offset, gain and integration time, the SPM can be =
used at=20
vastly all type of firings. |
|
Spectral =
range:=20
280-1100 nm (depending on type) |
|
Operating =
voltage: 24=20
VDC |
|
Version: =
also available=20
with Ex-protection and =
LWL-technique |
|
Type of =
protection: IP=20
65 |
|
Measuring =
output:=20
frequency (system 3000/4000 compatible) or 0/4-20=20
=
mA | |